I have replaced a PanelView 550 with a Panelview PLus 600
2711P-K6M20A8 on a machine that is using a program that has already been developed and a known working program. It has a CompactLogix L30ER. The PanelView is very slow in processing data that I enter via the keypad. It can take 3 to 4 seconds for it to appear as a new entry. There is also a data box on the screen to tally the number of strokes as the machine is running. While it is accurate it is very slow to display the strokes as it is running. Is there any way to increase the process time on the Panelview? I should add that the other machine has a SLC 5/03 in it but the same issue with the Panelview. It is using serial connections while the CompactLogix is ethernet. The PanelView 550 did not have this issue.
2711P-K6M20A8 on a machine that is using a program that has already been developed and a known working program. It has a CompactLogix L30ER. The PanelView is very slow in processing data that I enter via the keypad. It can take 3 to 4 seconds for it to appear as a new entry. There is also a data box on the screen to tally the number of strokes as the machine is running. While it is accurate it is very slow to display the strokes as it is running. Is there any way to increase the process time on the Panelview? I should add that the other machine has a SLC 5/03 in it but the same issue with the Panelview. It is using serial connections while the CompactLogix is ethernet. The PanelView 550 did not have this issue.
Last edited: