TheHerb
Member
Good day, is there a way for FX3U-64DP-M to continue cyclic data exchange when one of the active slaves is disconnected or shut off. If there is a way, I would like to know how it is done. Thanks.
FX3U-64DP-M, profibus missing slave
- Thread starter TheHerb
- Start date
Similar Topics
I have another problem with a only slave profibus, like in an old topic : the profibus diagnostic it's all ok, i don't have any error on the bus...
I'm a beginner in the automation field and I've set up an automation system connecting several devices (datalogger, radio, etc.) via Modbus RS485...
Hi All, want to ask.
I have PLC a programme to control the valve. The existing programme is to control valve A (Y22), and I want to change to...
Dear all,
I don't know why setup of password became challenging and weird. After setting up the password and try to upload the ladder from the plc...
Dear all,
I have fx3u series plc with built in rs422 port and usb-sc09-fx cable. I have a a hyperterminal like application to send and receive...