I feel really, really dumb asking this, but I shall. I am using a Micrologix 1000 to toggle two outputs. I am using a timer to time and it drives a counter. My goal, which I've accomplished, is to toggle two outputs and have them get faster and faster over a 10 second period. After the 10 seconds, both outputs stay on. So it's BLINK ......... BLINK, BLINK.....BLINK, BLINK....BLINK, faster and faster until both come on. The problem I have is a dumb one. I need the counter to RESET anytime power is shut off and reapplied. Regardless of the previous state of the timer or counter. I should know this, but I'm having a DUH moment. HELP?