pgroff9 Member P Join Date Dec 2018 Location Wisconsin Posts 6 Apr 15, 2019 #1 I'm getting an error that I can't find the solution to. Motion control MASR .err 12 .exerr 7 The .err 12 is message error but i can't find anything for the extended error to try and pin down the issue. Thanks in advance
I'm getting an error that I can't find the solution to. Motion control MASR .err 12 .exerr 7 The .err 12 is message error but i can't find anything for the extended error to try and pin down the issue. Thanks in advance
maexio Lifetime Supporting Member M Join Date Nov 2005 Location Lindsay, ON Posts 27 Apr 15, 2019 #2 You've probably looked at this already -> But are you issuing overlapping instructions? It will generate an ExError 7 if you have an MGSD triggering at the same time i believe...
You've probably looked at this already -> But are you issuing overlapping instructions? It will generate an ExError 7 if you have an MGSD triggering at the same time i believe...
pgroff9 Member OP P Join Date Dec 2018 Location Wisconsin Posts 6 Apr 15, 2019 #3 There is one MGSD in the program in the initialization at start up. Otherwise all axis are shut down individually.
There is one MGSD in the program in the initialization at start up. Otherwise all axis are shut down individually.