View Single Post
Old July 12th, 2005, 12:57 PM   #1
South Africa

Mr_B is offline
Join Date: May 2005
Posts: 79
torque control???? VFD???

How do I do this?


Motor "a" feeds material and b pulls it.

Can one program/wire the drives in such a way that b gets a setpoint and a follows but according to motor b's Current drawn.

Hope I'm clear on this. Basicly wot I'm trying is to control a's speed with the current drawn by b so that there is always tension between the two. Not a lot but just a little.

BTW the drives are Yaskawa Varispeed VS mini J7


Last edited by Mr_B; July 12th, 2005 at 12:59 PM.
  Reply With Quote