SouthPahw
Member
I need to get a Cable to connect to:
● OMRON SYSMAC C20 C20-CPU73E 3G2C7-CPU73E
which I have the 3G2C7-LK201-EV1 Omron PLC Host Link Unit C20-LK201-EV1
and a
● OMRON SYSMAC C200H CPU01 C200H-ME831 Memory Unit EER-ROM 16kb
which I have an extra slot, so I am going to purchase the C200H-LK201 host link unit.
● I am using Syswin Software.
Mark at PLCtrainer thinks either of these may work for both, but suggested I put it out there:
“I think you can use the C200HS-CN220-EU with the host link
or you can use USB-CIF02 this is a 20 pin to USB”
I have searched the site and viewed many references, but nothing seems absolute;
Also have found the PDF to build the cable, which I am unable to do at this time and test.
Here are few from the archives just for quoting
January 1st, 2010
"You must use a Host Link (C200H-LK201 or 3G2A6-LK201) with C500-CN221-EU cable."
January 19th, 2006 by BobB
"I have used the Omron USB/232 converter successfully with GE 90-30, Hitachi E series, Mitsubishi A series, Schneider Zelio, Schneider Twido, Omron ZEN, Omron CJ1, Omron CS1, Omron CPM1A, Omron CQM1, Omron C200H with LK201E Host Link, Omron C200 Alpha, Omron CPM2A, AB SLC500, Omron NT600 screens, Omrom NS series screens, Modscan software into a Cummins LON/Modbus converter, various other Modbus RTU devices, Omron Device Net loop and quite a few others."
● Main Point/Question: Will Mark’s cables work, does anyone know for sure?
--C200HS-CN220-EU with the host link or USB-CIF02 this is a 20 pin to USB--
Or does anyone know other options?
Thanks
● OMRON SYSMAC C20 C20-CPU73E 3G2C7-CPU73E
which I have the 3G2C7-LK201-EV1 Omron PLC Host Link Unit C20-LK201-EV1
and a
● OMRON SYSMAC C200H CPU01 C200H-ME831 Memory Unit EER-ROM 16kb
which I have an extra slot, so I am going to purchase the C200H-LK201 host link unit.
● I am using Syswin Software.
Mark at PLCtrainer thinks either of these may work for both, but suggested I put it out there:
“I think you can use the C200HS-CN220-EU with the host link
or you can use USB-CIF02 this is a 20 pin to USB”
I have searched the site and viewed many references, but nothing seems absolute;
Also have found the PDF to build the cable, which I am unable to do at this time and test.
Here are few from the archives just for quoting
January 1st, 2010
"You must use a Host Link (C200H-LK201 or 3G2A6-LK201) with C500-CN221-EU cable."
January 19th, 2006 by BobB
"I have used the Omron USB/232 converter successfully with GE 90-30, Hitachi E series, Mitsubishi A series, Schneider Zelio, Schneider Twido, Omron ZEN, Omron CJ1, Omron CS1, Omron CPM1A, Omron CQM1, Omron C200H with LK201E Host Link, Omron C200 Alpha, Omron CPM2A, AB SLC500, Omron NT600 screens, Omrom NS series screens, Modscan software into a Cummins LON/Modbus converter, various other Modbus RTU devices, Omron Device Net loop and quite a few others."
● Main Point/Question: Will Mark’s cables work, does anyone know for sure?
--C200HS-CN220-EU with the host link or USB-CIF02 this is a 20 pin to USB--
Or does anyone know other options?
Thanks
Last edited: