nehe bhimaji
Member
Dear All
I have siemens PLC network with CP342-5 in ring form
There is lenze drive on profibus .It becomes faulty we have replace it and download the program in it .Now drive is OK but the simatic station with CP342-5 is not communicating with other station .We have found error in AG_RECV block the error code is hex 8183(Station is not configured).My AG_SEND and AG_RECV block version is 1.11 .I have download the orignal PLC backup in the CPU but same problem is there is it necessary to update the AG_SEND & AG_RECV version by simatic Netpro?
Please suggest
Warm Regards
nehe
I have siemens PLC network with CP342-5 in ring form
There is lenze drive on profibus .It becomes faulty we have replace it and download the program in it .Now drive is OK but the simatic station with CP342-5 is not communicating with other station .We have found error in AG_RECV block the error code is hex 8183(Station is not configured).My AG_SEND and AG_RECV block version is 1.11 .I have download the orignal PLC backup in the CPU but same problem is there is it necessary to update the AG_SEND & AG_RECV version by simatic Netpro?
Please suggest
Warm Regards
nehe