plgrooms...Private Message me an email address and I'll send you a pre-release of the next version to try out. I'm hoping to post the updated version within the next week, so I would like to get this problem sorted out before I do.The only problem I am having is with some Remote I/O addresses. Everything works great for I:8/0 through I:8/15 however anything above I:8/15 does not work. What can I do to fix this? I am using a SLC 5/03 and the BasicLight.vb with the DF1Comm driver.
The first thing to do is to make sure RSLinx is shut down. The AdvancedHMI needs sole access to the COM port. If that not the problem, then add a basic label to the main form and it should report any error messages.I have a hobby project that I am using a micrologix 1000 on. I installed everything and can download and upload to the PLC with logix 500, but I can't get Advanced HMI to communicate with it. I am on com1 (the rs232 port)with my serial programming cable. Are there any basic tricks, or should it just work?
The easiest thing to do is to create a separate directory for each project and start by putting all of the original files in that directory1) If I have more than one project, how do I save and name the projects?
There is a Publish function in the Build menu that will give you a deployment package. The package will include all the necessary files and a setup.exe2) When it comes time to "use" the HMI after my development, is there a way to launch into run mode, or do I have to launch it into the development mode and hit the run button??
This is a good place so the information can be shared, but feel free to email me using the address that is in the comments of the DF1Comm.vb file3) I found the basic tutorials on youtube, but don't see anything on how to roll this out for use. Is there somewhere I should look so I don't have to keep asking you questions??
The digital panel meter also has a DecimalPosition property. I think that may be discussed in the "Exploring the Components" video.4) I am using a .01 timer base in my program. I want to display this in seconds x.xx . From what I can tell, the micrologix 1000 does not have a floating point decimal, so I only get an output of for instance 235 for 2.35 seconds and can't scale it in the plc to 2.35. Is there a way in the HMI to do this? I see the scale function for the digital meter, but it rounds off and only gives me whole numbers.
I'm going to take a guess at this as being the DPI setting on the new PC. In the display settings, there is a way to change the screen DPI. I found a link that shows how to do it in XP:When I drag a control from the toolbox to the hmi area, I then try to size it with the grips and only get a partial object. I tried screen resolution but can't seem to make this work. It works fine on my older laptop. Any ideas?
These should help:i am new in vb2008 code so i dnot kknow how i can i do ant project with source code for that then please give me link for that . i want to work on allen bradley micrologix 1400 and 1762-iq16