BAJ
Member
Good morning,
I had trouble getting my new 1734 I/O drop up and running yesterday during machine checkout, and again today after power-off/on over night. The AENTR is showing error 16#0010.
I have the number of slots set to 11 (correct) in the AENTR web interface, but when I browse the chassis, it won't find any modules after the last OB8E (slot 6).
Yesterday I took the 1734 apart, swapped modules, swapped bases and eventually got it to work (not sure how exactly).
This morning I'm in the same boat. The OB8E in slot 6 is the last module that shows up in the webserver chassis browse and the 1734sc-IF4U in slot 7. I tried swapping IF4U modules in slot 7, tried swapping 1734-TOPS bases in slots 6 and 7, nothing works. I moved the OE4C to slot 7 and the displaced IF4U to slot 10, now the chassis browse works. Studio5k shows the drop healthy too (other than the module mis-match in slots 7 and 10).
Any thoughts on what else I can try or what might be causing this?
I had trouble getting my new 1734 I/O drop up and running yesterday during machine checkout, and again today after power-off/on over night. The AENTR is showing error 16#0010.
I have the number of slots set to 11 (correct) in the AENTR web interface, but when I browse the chassis, it won't find any modules after the last OB8E (slot 6).
Yesterday I took the 1734 apart, swapped modules, swapped bases and eventually got it to work (not sure how exactly).
This morning I'm in the same boat. The OB8E in slot 6 is the last module that shows up in the webserver chassis browse and the 1734sc-IF4U in slot 7. I tried swapping IF4U modules in slot 7, tried swapping 1734-TOPS bases in slots 6 and 7, nothing works. I moved the OE4C to slot 7 and the displaced IF4U to slot 10, now the chassis browse works. Studio5k shows the drop healthy too (other than the module mis-match in slots 7 and 10).
Any thoughts on what else I can try or what might be causing this?