NewGuyHere
Member
I am very new so I will try to give as much information as possible. I cannot get a Prolific PL-2303TA USB to RS232 to connect to an Omron ZEN 10C1AR-A-V2 with Omron 8E1AR on Win10.
I have followed the exact steps in the Omron Manual and no dice. I have tried older drivers for the PL-2303 and no luck. I even selected the wrong Omron model in the ZEN support software before connecting to see if a error code would pop up and it just keeps saying Failed To Connect To Zen. I think its the cable that's the issue.
I've been reading for hours on here and in the Manual. Can not figure this out.
I have followed the exact steps in the Omron Manual and no dice. I have tried older drivers for the PL-2303 and no luck. I even selected the wrong Omron model in the ZEN support software before connecting to see if a error code would pop up and it just keeps saying Failed To Connect To Zen. I think its the cable that's the issue.
I've been reading for hours on here and in the Manual. Can not figure this out.