islman1975
Member
- Join Date
- Jan 2005
- Posts
- 16
I'm having trouble programming a SLC 505 over ethernet. I've set the IP addresss of the processor serially and can ping the node fine from my PC.( i'm using a hub and 2 patch cables not cross over). I'm not sure which one of the two ethernet drivers in RSlinx i need to use to get RSLogixs 500 to connect to my PLC so I can program it. I've tried both and neither can see the PLC ethernet node at all. Can't find a decent manual explanning the settings in thease two drivers neither.
I'm using RS Logix 500 build 5.50.00 & RSLinx 2.40.01(Build16). The SLC505 is a 1747-L551B.
I'm using RS Logix 500 build 5.50.00 & RSLinx 2.40.01(Build16). The SLC505 is a 1747-L551B.