vijeo designer 5.0

fiero · Feb 6, 2010

I have created a project in vijeo designer 5.0 that has 5 base panels. I would like to have the panels switch every 10 seconds. eg. display each panel for 10 then switch to the next panel and repeat it.

Can someone tell me how to do this?

Fiero

jstolaruk · Feb 6, 2010

Without the PLC? or with the PLC? IF yes, which PLC?

fiero · Feb 6, 2010

without the plc.

jstolaruk said:
Without the PLC? or with the PLC? IF yes, which PLC?

jstolaruk · Feb 6, 2010

I don't have a HMI to test this but look into Periodic Actions. It looks like you can create one to change panels or run a script that could change your panels or set an internal tag (a bunch of things can be done). Good luck and let us know how it works out.

fiero · Feb 6, 2010

Yes I was able to create a Periodic Action under each panel called Panel Actions and achieve the desired result.
Thanks for the tip!

Fiero

jstolaruk said:
I don't have a HMI to test this but look into Periodic Actions. It looks like you can create one to change panels or run a script that could change your panels or set an internal tag (a bunch of things can be done). Good luck and let us know how it works out.

rishwan · Nov 6, 2017

Anyone has vijeo designer 5.0 please ineed to update a project to 6.2 .

Pretty please

chud · Nov 7, 2017

rishwan said:
Anyone has vijeo designer 5.0 please ineed to update a project to 6.2 .

Pretty please

Send me a Pm with your email and i will update it for you

vijeo designer 5.0

fiero

Member

jstolaruk

Lifetime Supporting Member

fiero

Member

jstolaruk

Lifetime Supporting Member

fiero

Member

rishwan

Member

chud

Member

Similar Topics