Peter Nachtwey
Member
Dead time is measured from the time the control output changes, the orange line, to the time the system responds.
You have the wrong definition of dead time.
There may be multiple dead times in a system but they can be combined into one.
I don't agree with quantizing the control output into such coarse steps.
Quantizing to steps may work if the update rate was faster. Then this would be like a multi step PWM.
A thousand curses on the person that designed this mess.
You have the wrong definition of dead time.
There may be multiple dead times in a system but they can be combined into one.
I don't agree with quantizing the control output into such coarse steps.
Quantizing to steps may work if the update rate was faster. Then this would be like a multi step PWM.
A thousand curses on the person that designed this mess.