So, I'm wanting to convert our control panels to class 2 systems whenever I get a chance.
The issue is, most of the time I only have 480VAC and 24VDC on a project - no 120VAC needed.
The one way I've found around this is using a Siemens selectivity module or a Murrelektronic Mico off a 10A power supply. It seems most manufacturers only offer a 10A or 20A supply (240W / 480W) - and in most cases I don't need more than 4A or so.
Does anyone know of any 480 to 24vdc power supplies that would deliver a class 2 power source or other ways to achieve this without having to overkill the power supply?
Thanks!
The issue is, most of the time I only have 480VAC and 24VDC on a project - no 120VAC needed.
The one way I've found around this is using a Siemens selectivity module or a Murrelektronic Mico off a 10A power supply. It seems most manufacturers only offer a 10A or 20A supply (240W / 480W) - and in most cases I don't need more than 4A or so.
Does anyone know of any 480 to 24vdc power supplies that would deliver a class 2 power source or other ways to achieve this without having to overkill the power supply?
Thanks!