tcf24m
Member
Hi
I am using the panelview 300 (2711-K3A10L)...I am trying to develop the HMI but I do not have a devicenet network to plug into, so i get a "comms error = 11" does anyone know how to clear this fault away so I can contiue to develope the HMI without plugging into a network.
Tom
I am using the panelview 300 (2711-K3A10L)...I am trying to develop the HMI but I do not have a devicenet network to plug into, so i get a "comms error = 11" does anyone know how to clear this fault away so I can contiue to develope the HMI without plugging into a network.
Tom