BluSuedeNicNac81
Member
I have two AB 1769-OW8I/B digital output cards on a remote rack that are giving me the following fault:
(Code 16#0009) Module Configuration Rejected: Parameter Error.
Additional Fault Code 16#0401
No way to clear the fault except power cycling the rack. I have two identical process lines running the same equipment in the same configuration, but it's only this one I have the problem on. Thoughts? If anyone has a fault code list for this module, you'd be my hero for sharing it, since I can't make heads or tails of what I'm seeing.
(Code 16#0009) Module Configuration Rejected: Parameter Error.
Additional Fault Code 16#0401
No way to clear the fault except power cycling the rack. I have two identical process lines running the same equipment in the same configuration, but it's only this one I have the problem on. Thoughts? If anyone has a fault code list for this module, you'd be my hero for sharing it, since I can't make heads or tails of what I'm seeing.