mcummins
Member
Hi peoples
First post, be gentle (and helpful if you can)
Been having a lot of fun with my View SE V4.0 server.
I had an accident where a new server got introduced with the same name while the SE server was done. Real mess in my domain once both where powered up.
Anyway, had to rename my SE server, which of course hosts my FactoryTalk Directory, and my distributed application. The FactoryTalk seems to have survived the move, maybe because it points at localhost? But the application.. Nup.. had to backup it's file, delete, recreate, and relink through LinxNG. Got it running, but the SE client workstation would not redirect with any of the Rockwell FactoryTalk apllications, and Rockwell TechConnect couldn't help. Here's a tip, go through your client registry looking for your original server name, and change it.
Therefore, SE Server and cleints have been purring away for the last three weeks nicely.
BUT...
View Studio comes up with a wierd fault when I access the distributed Application.
Error:HRESULT = "0x8004206e" Location = ".\RNADirServerProxy.cpp,Line: 16222".
Failed to load class '{43D605CB-8891-48DA-8302-C82D143EEA8B}' from FactoryTalk Schema. hr=0x8004206E.
There's nothing in Rockwell Knowledgebase that even comes close to this.
Any ideas or suggestions guys?
Regards
Michael
P.S. I'll try to keep a bit more of an eye on the forums. I have aquired some hard-won troubleshooting knowledge with the following
AssetCentre V2
RSLogix 5000 V15.02 (and Contrologix too)
ControlNet
ME Versaviews
SE Cleints (especially VBA problems)
SE server and studio
Maybe I can help someone else
First post, be gentle (and helpful if you can)
Been having a lot of fun with my View SE V4.0 server.
I had an accident where a new server got introduced with the same name while the SE server was done. Real mess in my domain once both where powered up.
Anyway, had to rename my SE server, which of course hosts my FactoryTalk Directory, and my distributed application. The FactoryTalk seems to have survived the move, maybe because it points at localhost? But the application.. Nup.. had to backup it's file, delete, recreate, and relink through LinxNG. Got it running, but the SE client workstation would not redirect with any of the Rockwell FactoryTalk apllications, and Rockwell TechConnect couldn't help. Here's a tip, go through your client registry looking for your original server name, and change it.
Therefore, SE Server and cleints have been purring away for the last three weeks nicely.
BUT...
View Studio comes up with a wierd fault when I access the distributed Application.
Error:HRESULT = "0x8004206e" Location = ".\RNADirServerProxy.cpp,Line: 16222".
Failed to load class '{43D605CB-8891-48DA-8302-C82D143EEA8B}' from FactoryTalk Schema. hr=0x8004206E.
There's nothing in Rockwell Knowledgebase that even comes close to this.
Any ideas or suggestions guys?
Regards
Michael
P.S. I'll try to keep a bit more of an eye on the forums. I have aquired some hard-won troubleshooting knowledge with the following
AssetCentre V2
RSLogix 5000 V15.02 (and Contrologix too)
ControlNet
ME Versaviews
SE Cleints (especially VBA problems)
SE server and studio
Maybe I can help someone else