ralfhfellipe
Member
Good evening everyone,
Is an application I'm using a module in a HSCE2 Rockwell SLC500, but after seeing how difficult it is to work with this card, I chose to work with discrete inputs 1746ITB16 Card. Is there any special configuration for this card? The application is very simple to perform reading of an inductive sensor with a speed of 60 Hz. And each reading, add a value to a float variable. This application is to accumulate the amount of material passing over a pulley. Or how can I configure HSCE2 Class4 for this application?
First of all thank all the attention.
Is an application I'm using a module in a HSCE2 Rockwell SLC500, but after seeing how difficult it is to work with this card, I chose to work with discrete inputs 1746ITB16 Card. Is there any special configuration for this card? The application is very simple to perform reading of an inductive sensor with a speed of 60 Hz. And each reading, add a value to a float variable. This application is to accumulate the amount of material passing over a pulley. Or how can I configure HSCE2 Class4 for this application?
First of all thank all the attention.
Last edited: