Jpond
Member
I have a 1747-UIC module connected and went through steps configuring the driver for the 1747-UIC in windows. I've tried driver "DH 485 UIC device", RS-232 DF1 device and set, Baud 19200, Parity None, Stop Bit 1, Station Number 00, error checking to CRC, and Protocol Full Duplex. The problem is the light on the module appear to be blinking as if everything is communicating but the processor does not show in rslinx. all that shows is my workstation. The processor I'm trying to hook up to is a SLC 5/03.