Hi guys,
I have a task to upgrade a firmware for all the
module in a redundancy system. In my redundant chassis has at slot 0 1756-L61, slot 1 and 2 1756-CNBR/E, slot 3 1756-ENBT and slot 4, 5 is 1857-SRM. I am going to flash each modules firmware at both chassis as per 16.057 Firmware Bundle kit release notes. There is a procedure in that release notes to flash the module without need to turn off the chassis.
My question now, can i use ethernet to flash each modules firmware including the 1756-ENBT? How to flash 1756-ENBT firmware via ethernet? If im not mistaken once we flash the ENBT module it will erase thr IP address of the module and loss it communication. Or do i need to flash thr ENBT via serial comm at L61 controller?
Thanks in advance
I have a task to upgrade a firmware for all the
module in a redundancy system. In my redundant chassis has at slot 0 1756-L61, slot 1 and 2 1756-CNBR/E, slot 3 1756-ENBT and slot 4, 5 is 1857-SRM. I am going to flash each modules firmware at both chassis as per 16.057 Firmware Bundle kit release notes. There is a procedure in that release notes to flash the module without need to turn off the chassis.
My question now, can i use ethernet to flash each modules firmware including the 1756-ENBT? How to flash 1756-ENBT firmware via ethernet? If im not mistaken once we flash the ENBT module it will erase thr IP address of the module and loss it communication. Or do i need to flash thr ENBT via serial comm at L61 controller?
Thanks in advance