facuff
Member
I have a 1761-net-ini connected to a slc504. I have been talking to it wireless over a bridge, for about a year. The wireless is very unstable, so I ran fiber over to it and have the 1761-net-ini on the network, the 1761 shows in the RSlinx , but I cannot, in any way, see the slc504. I am using the AB_ETHIP driver running RSlinx Classic Lite Rev. 2.57.00.14., The 1761 shows up as "192.168.110.2, ENI, 1761-NET-ENI/C" so, RSlinx is seeing it, and recognizes it. I am using the same cable that I configured the 1761 with,to connect to the slc504, rs232 port. I have that port configured DF1 Full Duplex 19200, no parity, 1 stop bit, ID 1, CRC.
So, what more can I do?
So, what more can I do?