1769-IR6 -Adding cards to application Properties/revision select does not have 1.3

Baker in Virginia

Member
B
Join Date
Aug 2016
Location
Virginia
Posts
343
Good Morning ,

I have a Compactlogix application and I'm adding cards to it. I purchased new cards and I'm selecting the FW versions of the cards in properties . I took notice that my 1769-IR6 only has the 1.001 option in properties not the 1.003that the new card has . What is the best way to get the correct version for that 1769-IR6 ?

Thanks so much ,
 

Similar Topics

A
1769-IR6/A RTD reading
Hello all, I am fairly new to the PLC world and doing some self learning to pick up the nuances. Your help is highly appreciated. Question: I...
Replies
3
Views
2,843
Mickey
Mickey
A
RTD input card (1769-IR6)
Hello, im using a mircologix 1500 plc with a 1769-IR6 rtd input card. I am having trouble getting the readings from the rtds to displays as values...
2
Replies
18
Views
5,868
Mickey
Mickey
O
AB 1769- L30 Input Card Question
I have a 120V relay, 120V DI card and a analog input. I was wanting to know if i could put a 24V DI and well as a 120V DI card on the same plc...
Replies
1
Views
89
joseph_e2
J
S
Backplane Data Transfer Speed of CompactLogix 1769 Series?
Does anyone know what the data transfer rate for this series of CompactLogix PLC's? 1769-L24ER-QB1B to be exact. Cheers.
Replies
1
Views
128
robertmee
R
B
AB 1769-L31 not listed in studio 5000
I have a CompactLogix 1769-L31 and need to communicate with it. I only have studio 5000 on my computer. However, when I try to start a new project...
Replies
12
Views
425
jstolaruk
J
Back
Top Bottom