1769-pb2

CallumMacEwen

Member
C
Join Date
Jul 2015
Location
Scotland
Posts
42
Has anyone on here ever had any issues with the 24V+ and 24V- terminals on this unit shorting together. I went on site before the unit had been switched on and this was the case. I checked the voltage going to the unit and it was a steady 24v.

We then bought a new one and it has worked for 4 weeks but now the same problem has happened. Just wondering if anyone could shed any light on this. Possible surge. Nothing else is being damaged though and its the same common 24v supply.

Cheers

Callum
 

Similar Topics

O
AB 1769- L30 Input Card Question
I have a 120V relay, 120V DI card and a analog input. I was wanting to know if i could put a 24V DI and well as a 120V DI card on the same plc...
Replies
1
Views
89
joseph_e2
J
S
Backplane Data Transfer Speed of CompactLogix 1769 Series?
Does anyone know what the data transfer rate for this series of CompactLogix PLC's? 1769-L24ER-QB1B to be exact. Cheers.
Replies
1
Views
126
robertmee
R
B
AB 1769-L31 not listed in studio 5000
I have a CompactLogix 1769-L31 and need to communicate with it. I only have studio 5000 on my computer. However, when I try to start a new project...
Replies
12
Views
420
jstolaruk
J
geniusintraining
Allen Bradley Firmware flashing issues 1769-L24ER-BB1B
I have a 1769-L24ER-BB1B and I am trying to flash it to 34xx, its flashing red and faulted, when I try to flash it I get a popup stating it needs...
Replies
14
Views
277
geniusintraining
geniusintraining
id10t_error
1769-L24-QBFCB1 Embedded Counter Fault Reset (OK Light Flashing)
Hi Guys, I have a 1769-L24-QBFCB1 that has the OK light flashing on the embedded counter module. The manual states it is a resettable fault, but...
Replies
0
Views
121
id10t_error
id10t_error
Back
Top Bottom