Hi,
I am using AB 1766L32BXB PLC to connect convyer kit(which is 24vdc supported)"
http://www.fischertechnik.de/en/desktopdefault.aspx/tabid-24/41_read-63/usetemplate-2_column_pano/"
The problem i am facing is even though the photo transistor is working as expected(24V giving when no object and 0V when there is an object),the same is not able to recognised by the PLC input(which supports 24vdc).I have tested the PLC by giving 24v and 0V directly from power supply and it is able to switch the input(this test is done to test plc input pin is working as expected.
for both PLC and conveyer the power supply is same.
This is a basic question but don't have knowledge on wiring.Please let me know if anything missing here.
Thanks,
Bhaskar.
I am using AB 1766L32BXB PLC to connect convyer kit(which is 24vdc supported)"
http://www.fischertechnik.de/en/desktopdefault.aspx/tabid-24/41_read-63/usetemplate-2_column_pano/"
The problem i am facing is even though the photo transistor is working as expected(24V giving when no object and 0V when there is an object),the same is not able to recognised by the PLC input(which supports 24vdc).I have tested the PLC by giving 24v and 0V directly from power supply and it is able to switch the input(this test is done to test plc input pin is working as expected.
for both PLC and conveyer the power supply is same.
This is a basic question but don't have knowledge on wiring.Please let me know if anything missing here.
Thanks,
Bhaskar.