geniusintraining
Lifetime Supporting Member + Moderator
So I am have bad day or I have just something I can not see
I have 3 standard PV's T6C5L1 this is a RS232 (DH485) one port, I can download or upload the app on all 3 with a UIC but NOT a straight through cable?
Chapter 12 http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711-um014_-en-p.pdf
The confusing part for me is look at page 36 bottom pic RS-232 (DH-485) , then 37 #9
I even downloaded the firmware via RS232 on COM 1, then tried to download the app but nothing... anyone have any ideas?
I have tried every possible download (I think) in PanelBuilder 32, even tried the download upload program
I have 3 standard PV's T6C5L1 this is a RS232 (DH485) one port, I can download or upload the app on all 3 with a UIC but NOT a straight through cable?
Chapter 12 http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711-um014_-en-p.pdf
The confusing part for me is look at page 36 bottom pic RS-232 (DH-485) , then 37 #9
#9 RS-232 (DH-485) Communication Port Connects to the Channel 0 port of an SLC 5/03, 5/04, or 5/05 for point-to-point DH-485 communication. Connects to a MicroLogix controller through an AIC+ Link
Coupler. Also connects to the RS-232 serial port of a computer for transferring
applications
I even downloaded the firmware via RS232 on COM 1, then tried to download the app but nothing... anyone have any ideas?
I have tried every possible download (I think) in PanelBuilder 32, even tried the download upload program