Highland Controls
Member
When a new circuit needed to be added(1 new wire), I had someone suggest to me that we use the white wire in the conduit, and use the conduit for the neutral. I said no.
3 phase load wiring
- Thread starter HereForBeer
- Start date
Similar Topics
Any panel I've built with contactors and overloads has been 3 phase.
I'm now quoting on one with some small single-phase loads. Definition of...
I find myself needing to protect a large batch (16+) of small single phase 120V motors from overload; I've been told by the client their FLA is...
Single phase 120/208-240V motor.
L1-L2 Voltage = 215
L1 Amp=7.5 (close to nameplate)
L2 Amp=13.7
Motor is tripping overload, motor case is hot...
I apologize, this isn't really a PLC question, but I am asking since this is probably the only place I know where I can get a reliable answer to a...
I know this isn't exactly PLC related, but the noise my VFD is causing is. I was wondering if anyone had any success using this type of solution...