4-20mA Lamda sensor for biogas engine

grnick50

Lifetime Supporting Member
G
Join Date
Nov 2010
Location
Ptolemaida
Posts
332
Hello,

I have a client with a Biogas genset and there are no means of determining the quality of the combustion, unless we use our TESTO gas analyzer. However, this is not a permanently installed instrument.
I was thinking of installing a Lamda sensor, or an O2 sensor to measure realtime the Exhaust gas.
Does anyone know of such instruments that have a 4-20mA output or 0-10V output?
 

Similar Topics

J
4-20mA loop grounding
Hi all, I'm connecting several 4-20mA sensors together in parallel (only one shown below) The enclosure is ABS plastic with metal backplate DAQ...
Replies
5
Views
290
Jenny8711
J
A
Looking for a 4 or 8-channel converter for 4-20mA inputs and 0-135Ohm outputs
Problem: Our PLC can only output 4-20mA, but the actuators it needs to control, modulate based on a 0-135Ohm signal. Buying 4 or 8 individual...
Replies
7
Views
285
AdaptnOvercome
A
D
4-20ma isolator.
What's your go to 4-20ma isolator. I've got some 4 wire 4-20ma from several flow meters and scales that I would like to isolate before it gets to...
Replies
10
Views
1,706
jdbrandt
J
S
4-20mA analog output from DCS
Hi, I need to read three 4-20mA signals from a DCS(ABB) in a remote 6 channel analog input module with RS485 modbus port. When I connected...
Replies
2
Views
498
danw
danw
V
4-20ma loops with multiple supply's on different inputs can you the commons together
Hello this is my first post. Looking forward to being more involved in this community to learn and hopefully help others. Any help or guidance...
Replies
7
Views
799
lfe
L
Back
Top Bottom