I have a 5069-L306ERS2 set to dual IP mode. Both ports are set to static IP address and have different IP addresses, subnet masks, and gateways configured. However, on port A2, the DNS server and domain fields are greyed out and I can't see any way to enable them. Port A1 is fine; it has the DNS/domain entered and working; though port A1 was configured second, so I don't believe it's a case of "whichever one you configure first is the only one you can configure".
Is there some restriction about only being able to set up DNS/Domain on port A1 in dual IP mode? I can't find anything on the knowledge base or the manual, but perhaps I'm just not using the correct search terms.
Is there some restriction about only being able to set up DNS/Domain on port A1 in dual IP mode? I can't find anything on the knowledge base or the manual, but perhaps I'm just not using the correct search terms.