Davek0974
Member
I'm getting back into the driving seat of plc programming after a long break, I have a machine rebuild and want to re-use an AB SLC 503 plc as I have it lying around along with a stack of I/O boards.
The only part I am unfamiliar with is the stepper control unit - 1746-HSTP1, this machine needs to talk to a ServoStar601 drive using step/direction signals to command a feed to supply X MM of material on each cycle.
Does anyone here have any examples of using this module that could offer advice?
The only part I am unfamiliar with is the stepper control unit - 1746-HSTP1, this machine needs to talk to a ServoStar601 drive using step/direction signals to command a feed to supply X MM of material on each cycle.
Does anyone here have any examples of using this module that could offer advice?