Hi
New to PLCs, up until now I have played with smart relays and the siemens S7-1200 line with TIA.
I am trying to get a AB Micro820 to talk to a Schneider HMIST6200. I can create a program in CCW, and export the variables into ecostructure operator terminal within the RockwellEtherNetIP symbol link.
From there can bind variables to objects/parts in the HMI.
All the IP address are correct but I don't have any luck getting the HMI to communicate with the PLC
Is what I'm trying to do even possible with the two bits of hardware and do I need to configure anything on the 820 side?
Any help would be appreciated!
New to PLCs, up until now I have played with smart relays and the siemens S7-1200 line with TIA.
I am trying to get a AB Micro820 to talk to a Schneider HMIST6200. I can create a program in CCW, and export the variables into ecostructure operator terminal within the RockwellEtherNetIP symbol link.
From there can bind variables to objects/parts in the HMI.
All the IP address are correct but I don't have any luck getting the HMI to communicate with the PLC
Is what I'm trying to do even possible with the two bits of hardware and do I need to configure anything on the 820 side?
Any help would be appreciated!