AB Micro820 with Schneider HMIST6200

shaunss

Member
S
Join Date
Dec 2023
Location
NZ
Posts
1
Hi

New to PLCs, up until now I have played with smart relays and the siemens S7-1200 line with TIA.

I am trying to get a AB Micro820 to talk to a Schneider HMIST6200. I can create a program in CCW, and export the variables into ecostructure operator terminal within the RockwellEtherNetIP symbol link.
From there can bind variables to objects/parts in the HMI.

All the IP address are correct but I don't have any luck getting the HMI to communicate with the PLC

Is what I'm trying to do even possible with the two bits of hardware and do I need to configure anything on the 820 side?

Any help would be appreciated!
 

Similar Topics

C
Micro820 Modbus TCP
I’m trying to read values from a device that can either send registers as 32 bit or a pair of 16 bit but if I understand right, the micro can only...
2
Replies
26
Views
818
drbitboy
drbitboy
B
Can't read from a Micro820 Modbus Server / Slave
Hello, I set up my Micro820 with a basic mapping. When I try to run a script to read the addresses I get errors for illegal addresses...
Replies
2
Views
170
bill1995
B
K
Problems with Micro820 communication as Modbus RTU Master
Hi Guys, I am a new member and this is my first post! I have a little PLC experience but it is mostly with siemens logo and using ladder...
Replies
4
Views
904
drbitboy
drbitboy
M
Micro820 how to get back in Run Mode via SD card?
Hello, I am using a AB Micro820 PLC, via the SD card I want to update the PLC program (not FW). First I created a text file on the SD card with...
Replies
2
Views
298
MauritsKoppe
M
E
Micro820 analog output module 2080-OF2 bad?
I have run into a problem with my first time installing a 2080-OF2 module on a Micro820 and have a hunch that the module itself - brand new out of...
Replies
9
Views
932
willms
W
Back
Top Bottom