AB PowerFlex 525 Faults

Tom Kazakoff

Member
Join Date
May 2004
Location
Boulder Creek, Ca.
Posts
26
I have 4 AB powerflex 525's in our system. I need to write an error handler that will field the faults that the VFD can get. There are many faults, some of which are not critical. What I need is a list of faults that are serious enough to warrant a system shutdown, and perhaps an example of how to get the faults from the VFDs. Has anyone done this before?

Thanks Much,
Tom Kazakoff
Trevi Systems
 

Similar Topics

Good Evening , After running for 2 years , I have a few Powerflex 525 drives faulting out with a F 73 Ethernet Fault . What have you guys...
Replies
5
Views
2,599
Continuously getting over voltage faults on our 525 Drive when NOT running. I have increased the DC voltage parameter, installed reactor on line...
Replies
7
Views
7,320
Hello Everyone, I have an application using a 525 on ethernet and the safe torque off wired through an Allen Bradley CAT3 Safety Circuit. The S+...
Replies
11
Views
45,964
The VFD has a catagory of errors called TYPE 1. Evidently these are not serious or fatal errors. There are two parameters that allow you to have...
Replies
1
Views
3,478
All, I have a PowerFlex 525 driving an agitator motor. The goal is to have the agitator start automatically after a power loss or a comm loss. I...
Replies
2
Views
67
Back
Top Bottom