AsGreenAsGrass
Member
Hey guys so I have this switch previously set up by someone else so the ip/gateway/subnet is all put into the switch - port 1 is set up to send that IP to whatever is plugged into it (my laptop for instance) and it connects no problem (can ping the switch using cmd).
If i wanted to figure out what IP/Gateway/Subnet designation is in the switch how do i go about doing so IF port 1 wasnt set up to allow me to automatically obtain the information.
If i wanted to figure out what IP/Gateway/Subnet designation is in the switch how do i go about doing so IF port 1 wasnt set up to allow me to automatically obtain the information.
Last edited: