Stratix 5700 Switch Port Forwarding

Chibu

Member
C
Join Date
Feb 2023
Location
Ontario
Posts
49
Hi Guys,
I have a Stratix 5700 managed switch that will connected to another different network thus: Stratix 1 on 10.50.3.xx >connect through Firewall >>connect to Router >> then connect to Stratix 2 on 10.50.7.xx.
I presume the comms won't be achieved by Inter-VLAN routing.
I will appreciate if someone could please point me in the right direction regarding port forwarding in stratix 5700 switch.
 

Similar Topics

H
Connect Stratix 5700 Switch (Software Update problem)
hello guys. I'm using 5 Stratix 5700 Switches 4 of them make DLR(Device Level Ring) And one of them software version is not matched 15.2(6)E1...
Replies
2
Views
2,299
huhu0901
H
A
AB Stratix 5700 switch: Finding IP configuration
Hey guys so I have this switch previously set up by someone else so the ip/gateway/subnet is all put into the switch - port 1 is set up to send...
Replies
2
Views
3,604
mylespetro
mylespetro
N
Setting up a Stratix 5700 switch
Gents, I've an Allen Bradley Stratix 5700 full firmware managed switch and need configure some kind of NAT but don't know how to fix this. This...
Replies
0
Views
1,473
nightline
N
K
Stratix 5700 switch config problem
Hello, I am at a deadend using Stratix 5700 to connect two subnets together. Needing some fresh eyes. Basically, I have 1 PLC (IP address...
Replies
5
Views
8,154
KellyCorey
K
RussB
Stratix 5700 Switch and AB HMI faceplate
I have a customer who wants to start using the AB Stratix 5700 Switch (instead of what we now supply them) because of an AB HMI faceplate...
2
Replies
15
Views
12,145
Contr_Conn
Contr_Conn
Back
Top Bottom