The Plc Kid
Member
Guys i am in neede of some very advanced networking advice.
I have a system with contrologix cpu,enbt,panelview +,Versaview Panel PC,flex I/O,point I/O,Etc.
The ip range is 10.10.1.0 - 10.10.1.60
I need to run a background application on one of the versaview PC that needs a constant internet connection over wireless.
The versaview has 2 ethernet ports and we use 1 currently and the other is disabled. I have ultra VNC for remote connection to the versaview.
I need to make the second nic a different IP range to connect to the internet but i need to get the application in question and internet explorer binded to this second nic with FT view still binded to port 1.
How can this be done. i have everything connected and communicating but ie and all other programs want to go to nic 1 if i change the priority to nic 2 then ie works but the FT View app will not as it's gateway is thru nic 1.
Help.
I have a system with contrologix cpu,enbt,panelview +,Versaview Panel PC,flex I/O,point I/O,Etc.
The ip range is 10.10.1.0 - 10.10.1.60
I need to run a background application on one of the versaview PC that needs a constant internet connection over wireless.
The versaview has 2 ethernet ports and we use 1 currently and the other is disabled. I have ultra VNC for remote connection to the versaview.
I need to make the second nic a different IP range to connect to the internet but i need to get the application in question and internet explorer binded to this second nic with FT view still binded to port 1.
How can this be done. i have everything connected and communicating but ie and all other programs want to go to nic 1 if i change the priority to nic 2 then ie works but the FT View app will not as it's gateway is thru nic 1.
Help.