glplc_007
Member
Hello all, I'm looking for a push in the right direction with this one.
I'm in need to alternate two pumps using an Omron 10C3AR-A-V2 Zen program.
Here is the setup--
Float switch 2 - on - no operation
Float switch 3 - on - pump starts
Float switch 3 - off - continue pumping
Float switch 2 - off - stop pump
Which I have working great, but I cannot ,for the life of me, figure out how to get the other pump to run on the next cycle.
Any help is greatly appreciated.
I'm in need to alternate two pumps using an Omron 10C3AR-A-V2 Zen program.
Here is the setup--
Float switch 2 - on - no operation
Float switch 3 - on - pump starts
Float switch 3 - off - continue pumping
Float switch 2 - off - stop pump
Which I have working great, but I cannot ,for the life of me, figure out how to get the other pump to run on the next cycle.
Any help is greatly appreciated.