I have a 1746-hsce2 card located in slot 3 slc rack. The plc is a 5/05.
I am needing to read redlion 120 ppr quad encoder The roller it is hooked to is 4.5 inch in diameter which is .11775 inches per pulse or .0098125 ft per pulse. I am needing the encoder to measure ft. I have it wired like this
ENCODER-------HSCE2
red + 24-- vdc+
white A-- a1+
green b-- b1+
black com-- vdc com (also hooked to a1- and b1-)
What is the best setup for the card using this encoder. I am trying to make head or tails of the manual and all i am getting is frustrated. I am not at work so i can't try anything out to see what work and don't.
Any references to manuals or programs would be greatly appreciated.
thanks as always
I am needing to read redlion 120 ppr quad encoder The roller it is hooked to is 4.5 inch in diameter which is .11775 inches per pulse or .0098125 ft per pulse. I am needing the encoder to measure ft. I have it wired like this
ENCODER-------HSCE2
red + 24-- vdc+
white A-- a1+
green b-- b1+
black com-- vdc com (also hooked to a1- and b1-)
What is the best setup for the card using this encoder. I am trying to make head or tails of the manual and all i am getting is frustrated. I am not at work so i can't try anything out to see what work and don't.
Any references to manuals or programs would be greatly appreciated.
thanks as always