Another Thanks Ken R.

okiebob

Member
O
Join Date
May 2002
Location
McAlester, OK
Posts
98
Well Ken I/we went to Tulsa and did the demo on the PV550 (they didn't have the blue screen yet) and went over the design and it looks like the cost is going down by many K's and I will be using two (2) PV's and some programming and hard wire to produce the setup. I love it when a plan comes together. beerchug Thanks again
 

Similar Topics

H
RSLinx Bridge Configuration? Connecting through another PLC
I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T. I could easily get the second PLC...
Replies
3
Views
57
dmroeder
dmroeder
L
Read pulses from a magnetic-inductive flow meter and modify pulses by a user inputted valve and to output the modified rate to another pulse reader
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
177
Steve Bailey
Steve Bailey
R
Odd request RSLogix5000 - Send 80 character string from One PLC to another with I/O
So I had an odd request from a customer for the above. I have written the logic and tested it all in one PLC with only using 7 outputs and 7...
2
Replies
15
Views
443
drbitboy
drbitboy
O
Message Read entire Analog Inputs from CompactLogic to another CompactLogic PLC
Hello I need to message read the entire 16 channel raw analog inputs from a 1769-L33ER Compact Logic controller to another 1769-L33ER Compact...
Replies
8
Views
253
Ones_Zeros
O
S
Same instruction working on one program and doesn't works on another
I am noticing a problem where i am using MOV instruction and writing literal text into source and String datatype in destination. It works fines...
Replies
6
Views
494
Shivsrikakolum
S
Back
Top Bottom