Eemann Member E Join Date Oct 2019 Location Rizal Posts 3 Oct 18, 2019 #1 Hi everyone, I have Siemens S7-1200 1214C AC/DC/Rly CPU with CM 1241 Rs232 module and Enfora GSM 1208. Help me how to send sms using PLC. Thanks.
Hi everyone, I have Siemens S7-1200 1214C AC/DC/Rly CPU with CM 1241 Rs232 module and Enfora GSM 1208. Help me how to send sms using PLC. Thanks.
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Oct 18, 2019 #2 http://www.testech-elect.com/enfora/enfora_doc.htm http://www.plctalk.net/qanda/showthread.php?t=96850 Once you have the communication cable connected. Then it is then sending serial information out of the port. See the above documentation. I hope this helps you out. Regards,
http://www.testech-elect.com/enfora/enfora_doc.htm http://www.plctalk.net/qanda/showthread.php?t=96850 Once you have the communication cable connected. Then it is then sending serial information out of the port. See the above documentation. I hope this helps you out. Regards,
Eemann Member OP E Join Date Oct 2019 Location Rizal Posts 3 Oct 18, 2019 #3 Hello Garry, Thanks for your reply, but how can I command my GSM modem to send an sms? Is it okay that I just send a buffer with string data type? Example AT+CMGF=1 ? or I need to transform AT+CMGF=1 to a code? Please help me out to my problem.
Hello Garry, Thanks for your reply, but how can I command my GSM modem to send an sms? Is it okay that I just send a buffer with string data type? Example AT+CMGF=1 ? or I need to transform AT+CMGF=1 to a code? Please help me out to my problem.