wolverine1981
Member
My question is would converting a project originally from DirectSoft5 to DirectSoft6 loose the labels and rung descriptions.
One of our other locations e-mailed me a project that was originally in DirectSoft5 with DL250-1 processor. I was told that it was sent using DirectSoft6 and all labels and rung descriptions should be there but there is no labels or descriptions.
Thank You For Your Help
One of our other locations e-mailed me a project that was originally in DirectSoft5 with DL250-1 processor. I was told that it was sent using DirectSoft6 and all labels and rung descriptions should be there but there is no labels or descriptions.
Thank You For Your Help