Hi all..
I have Honeywell HC900 at my factoy.
Recently I try to download some function blocks that I made before to it. But when I try to communicate first with the PLC it's not work.
I communicate using ethernet cable and set my IP Address to 192.168.1.10.
I connect the ethernet cable to E1 port which what I know from the manual book is set to 192.168.1.254 IP Address, the PLC is in program mode.
I've try either straight and cross ethernet cable configurations, but still not work..
when I try to ping the PLC, I got "Destination Host is Unreachable" message.
What I have to do?
I have Honeywell HC900 at my factoy.
Recently I try to download some function blocks that I made before to it. But when I try to communicate first with the PLC it's not work.
I communicate using ethernet cable and set my IP Address to 192.168.1.10.
I connect the ethernet cable to E1 port which what I know from the manual book is set to 192.168.1.254 IP Address, the PLC is in program mode.
I've try either straight and cross ethernet cable configurations, but still not work..
when I try to ping the PLC, I got "Destination Host is Unreachable" message.
What I have to do?