rander13
Member
I have 5 Powerflex 527 STO CIP Safety drives being used as CIP Motion Control axis with control logix version 31.11 on a 5069-L340ERMS2 processor. The drives are daisy chained back to a Stratix. I am getting Control Sync faults on 2 of the drives. I either have to clear faults on the axis(drive) or cycle power to get them running again. I have unsuccessfully tried to look this up online multiple times. I don't have a TechConnect contract and every technote is requiring it. Any advice would be immensely appreciated.
Thanks
Kevin
Thanks
Kevin