Hi all. We have a substantial project with a less than optimal electrical contractor. A bunch of sealtite fittings were installed to NEMA 12 raceway and enclosures without sealing rings. The environment is genuinely worthy of seals. I feel somewhat bad making them de-term and re-term wires to install seals, but doing it right the first time was an option.
Does anyone know of a split sealing ring that could be installed by just removing the nut inside and slipping around the outside of the connectors? Maybe something made in two halves that interlock to provide an adequate seal? It's 1/2”, 3/4”, 1”, and 1-1/2” fittings.
Does anyone know of a split sealing ring that could be installed by just removing the nut inside and slipping around the outside of the connectors? Maybe something made in two halves that interlock to provide an adequate seal? It's 1/2”, 3/4”, 1”, and 1-1/2” fittings.