Control Panel Build Table

[Slwagner73]

I have Uni-strut mounted to the wall, and so, depending on the size of the panel, I just hang it on that strut.

 

[JeffKiper]

I have that exact table you pictured. I would buy it again if this one died. They are a huge help. We only use it for the larger backpanels. 72*72 can be laid out on it horizontal flipped vertical for wiring. We will pick the sub pan up with a forklift and drop it into the enclosure. We don't have to man handle an enclosure with 15 VFD on it anymore.

I have started drawing a 8020 version but stopped after figuring my man hours to design, build, and assemble it.

 

[GaryS]

The are many options. Whatever works for you is what counts
I would think you could build you own for far less then what they want
but that one is motorized it looks like up - down and tilt
the bigger problem I run into is how to lift and move large panels, that's always challenging