keithb
Member
Hi
I have set up 2 controllogix 13 slot chassis as follows:
Chassis 1 contains a 1756-L55 CPU and a CNB/D module (node 1) + various I/O modules.
Chassis 2 contains a CNB/D module (node 2) in slot 0 and various I/O modules.
I have connected the 2 CNB modules in the approved manner using controlnet taps, etc. and I have scheduled the network with RSNetworx for ControlNet. The I/O is responding without error.
Now to the question. The status displays cycle through the following messages:
CNB 1 shows OK, %C22, KpAv, nC01, nU05, A#01
CNB 2 shows OK, %C27, KpIv, nC11, nU00, A#02
What do these messages mean? I cannot find anything in the CNB user manual that describes these messages.
Thanks in advance
Keith
I have set up 2 controllogix 13 slot chassis as follows:
Chassis 1 contains a 1756-L55 CPU and a CNB/D module (node 1) + various I/O modules.
Chassis 2 contains a CNB/D module (node 2) in slot 0 and various I/O modules.
I have connected the 2 CNB modules in the approved manner using controlnet taps, etc. and I have scheduled the network with RSNetworx for ControlNet. The I/O is responding without error.
Now to the question. The status displays cycle through the following messages:
CNB 1 shows OK, %C22, KpAv, nC01, nU05, A#01
CNB 2 shows OK, %C27, KpIv, nC11, nU00, A#02
What do these messages mean? I cannot find anything in the CNB user manual that describes these messages.
Thanks in advance
Keith