Hello friends,
I am using Omron CP1E-N60DT1-D PLC with Pepperl Fuchs tvi50n rotary encoder 1000ppr. In CX-programmer 9.03 i have made following setting for Encoder :
1. HSC - 0 , Linear mode
2. Reset - Software reset
3. Input setting - Incremental pulse input
I am able to count encoder values using PRV instruction on DM100 and can see values at A270 and A271 but whenever i try to reset encoder using A531.0 Bit, it doesn't resets Encoder values in DM100.
Thanks in advance
I am using Omron CP1E-N60DT1-D PLC with Pepperl Fuchs tvi50n rotary encoder 1000ppr. In CX-programmer 9.03 i have made following setting for Encoder :
1. HSC - 0 , Linear mode
2. Reset - Software reset
3. Input setting - Incremental pulse input
I am able to count encoder values using PRV instruction on DM100 and can see values at A270 and A271 but whenever i try to reset encoder using A531.0 Bit, it doesn't resets Encoder values in DM100.
Thanks in advance