CPU S7-315-2DP stop mode

10baseT said:
If you remove a 343-1 physically from the rack , but leave it in the hardware config , it won't give a bus fault on the processor .
Click to expand...
Aha. Is this generic of all CPs ?
I guess that this is so only if the CP is the last one in the rack, or ?
 

Similar Topics

R
SIMATIC 300, CPU 315-2DP , (6ES7 315-2AF03-0AB0) VIPA 603-1CC21 A1.0 error coming
Dear sir, I am using SIMATIC 300, CPU 315-2DP , (6ES7 315-2AF03-0AB0) VIPA 603-1CC21 A1.0 RAM 32KB, Firmware=V4.0.8 The problem Im using MPI...
Replies
2
Views
211
Rakesharya
R
M
Siemens CPU 315-2DP Troubleshooting
I'll preface this by saying this is the first time I've worked on a Siemens system and I'm fairly unfamiliar with them. I might mess up some of...
2
Replies
29
Views
890
Ken Moore
Ken Moore
A
BF in Siemens CPU 315-2DP
Hi We were having a few power cuts and the CPU would not work. I had to reset the memory and he CPU would read from the memory card and start...
Replies
13
Views
3,239
azby
A
D
motor run time meter - CPU - 315-2DP
Hello, I used SFC64 TO MEASURE MOTOR RUN TIME , OUTPUT : LD Memory , in case of power failure runing hours return to zero or keep the status ...
Replies
5
Views
2,337
dmardinly
D
A
how to control festo cpv-10 Dl02 connected profibus with s7 300 & 315-2DP cpu?
hi there its my firest time working with profibus and i have already install gsd and networked profibus in step7 hw config and inserted base...
Replies
2
Views
2,530
Ranjith
R
Back
Top Bottom