Proficy ME lets me use any valid value I want for the assigned "Data Type". Exactly where are you attempting to use this "Unsigned Integer" value within PME?
Is it in Logic, a Parameter for a Function, Configuration of a module?
Here is a screen shot that may help: ( For reference only, the value 33721 really should be 0 here.)
I am using Proficy ME 7.50 SIM3 here.
hello,
That is, I need to put the address I have to point in that direction and ION7550 is 40150, then to set the value and throws an error compiling, but apparently achieved by placing the block UINT do.
Now try, then you commented, thanks