Hey guys.
As the title suggests, I need to configure a Danfoss Aquadrive FC202 inverter, so that its logic inhibits the local command when the PLC is communicating with the inverter. The inverter mode will always be “Auto ON”, never “Hand ON”, and operators will not have access to the inverter HMI. When "Auto ON" mode is selected, local commands (inverter inputs) have priority. But as I said, these commands should only be available if the inverter does not communicate with the PLC. I have no experience in Danfoss and I have 2 days to research how to configure this logic at Danfoss.
Any tips?
Thank you!
As the title suggests, I need to configure a Danfoss Aquadrive FC202 inverter, so that its logic inhibits the local command when the PLC is communicating with the inverter. The inverter mode will always be “Auto ON”, never “Hand ON”, and operators will not have access to the inverter HMI. When "Auto ON" mode is selected, local commands (inverter inputs) have priority. But as I said, these commands should only be available if the inverter does not communicate with the PLC. I have no experience in Danfoss and I have 2 days to research how to configure this logic at Danfoss.
Any tips?
Thank you!
