Hi all,
I am writing my first RSL 5000 program. When I verify the routine I get the following:
Verifying routine: MainProgram - UNLOADING...
Warning: Duplicate Destructive Bit Reference Detected: 'MainProgram - P201_RUN_BIT[0]'
MainProgram - UNLOADING, Rung 9, OTE
MainProgram - UNLOADING, Rung 7, OTE
Complete - 0 error(s), 1 warning(s)
I understand that the warning is telling me that I have the same tag on two different OTE instruction's. One will affect the other.
What I don't understand is the word "Destructive" in the frame work of a PLC program. What does it mean?
If you have a explanation I would appreciate it if you would share it with me.
I am writing my first RSL 5000 program. When I verify the routine I get the following:
Verifying routine: MainProgram - UNLOADING...
Warning: Duplicate Destructive Bit Reference Detected: 'MainProgram - P201_RUN_BIT[0]'
MainProgram - UNLOADING, Rung 9, OTE
MainProgram - UNLOADING, Rung 7, OTE
Complete - 0 error(s), 1 warning(s)
I understand that the warning is telling me that I have the same tag on two different OTE instruction's. One will affect the other.
What I don't understand is the word "Destructive" in the frame work of a PLC program. What does it mean?
If you have a explanation I would appreciate it if you would share it with me.